Vendors, Devices & Services New to Our Directories
Measurement Device News
New Products : Next Gen Mass Flow Meters & Controllers
Sierra Instruments releases the next generation mass flow meters and controllers, the Smart-Trak 2
Monterey CA, USA -- The result of over five years of user feedback, new features of the Smart-Trak® 2 have added even more control, independence and flexibility. Sierra is also proud to introduce the Compod™, a Smart-Trak® 2 add-on that expands networking, streamlines and simplifies functionality and reduces costs.
“We see this as adding a fourth point to our three-point Global Stimulus campaign we rolled out last month,” says Matthew J. Olin, President and CEO of Sierra Instruments. “Providing #1 cost-cutting, #2 free engineering and #3 expedited product delivery are crucial first steps for the hard-hit industries we serve. Now it’s time to bring them #4 innovative new Sierra products that will help expand their capabilities without increasing costs.”
Read full article: 'Next Gen Mass Flow Meters & Controllers'
Posted by Anonymous on Monday, June 01, 2009 (1051 Reads)
Applications : Air Gaging the Choice for Measuring Taper in Orthopedic Device Manufacturing
Air Gaging growing in popularity, especially in high precision areas
PROVIDENCE RI, USA – Tapers play an important role in orthopedic devices. Most hip and knee implants use tapers because they provide good alignment and can be "locked" into position. In manufacturing these devices, the control of taper and size determines how well the implants perform over their lifetime. Increasingly, air gaging has become the inspection tool of choice for controlling these critical parameters.
"Air gaging was the breakthrough gaging technology of the '40s and '50s" said George Schuetz, Director of Precision Gages for Mahr Federal.
"Introduced decades before electronic gaging, it provided the first high performance—50µ" or better—gaging on the shop floor. Despite its age, air gaging today is actually growing in popularity, especially in high precision areas like orthopedic devices. It is fast, easy to use, provides high precision results even under the toughest shop conditions, and can last for years measuring literally millions of parts."
Read full article: 'Air Gaging the Choice for Measuring Taper in Orthopedic Device Manufacturing'
Posted by Anonymous on Sunday, May 31, 2009 (2206 Reads)
New Products : ZMD cLite™ Capacitive Sensor Signal-Conditioning IC Delivers 14-Bit Resolution
ZMD31210 combines a wider range of input capacitance, operating temperature & power supply voltage for power-sensitive industrial, consumer and medical applications
Dresden, Germany -- ZMD AG has expanded its family of capacitive sensor signal conditioning devices with the wide-dynamic-range ZMD31210 cLite ™ integrated circuit (IC). The new design technology delivers 14-bit resolution and 0.5 percent accuracy over a wide range of capacitances and temperatures.
Capacitive sensors offer several benefits, including very low power operation, and the ZMD31210 supports this with a low 60 uA current draw over a supply voltage range as low as 1.8V or as high as 5.5V.
Read full article: 'ZMD cLite™ Capacitive Sensor Signal-Conditioning IC Delivers 14-Bit Resolution '
Posted by Anonymous on Friday, May 29, 2009 (1174 Reads)
Vendor : Long range RFID reader DL810 for asset tracking
Guangzhou / Guangzhou, China -- DAILY RFID has announced a HF Long Range RFID Reader DL810 with read range up to 90cm to cater for most HF applications.In addition, this Long range RFID reader is suited for asset tracking since it features fast read rate up to 50 pieces per second.
This Long Range RFID Reader DL810 can improve visibility in the asset tracking process with tag processing speed of 30~50pcs/s.
The integrated DL810 RFID devices can be used for most high frequency RFID applications such as the identification of goods and objects in industrial, logistics and production applications.
Read full article: 'Long range RFID reader DL810 for asset tracking'
Posted by RFID_DAILY on Thursday, May 28, 2009 (1230 Reads)
New Products : New Large Area, 25 mm diameter Pyroelectric Joulemeter Probes
Spectrum Detector, Inc. introduces two new Joulemeter probes can measure from 2 µJ to 200 mJ, 1 to 40kHz and DUV to Far IR
Lake Oswego OR, USA -- Spectrum Detector, Inc.has introduced two new models of their "delta" Joulemeter Probes. Model DPJ-25-OB which features a black absorbing coating for flat spectral response across the spectrum and model DPJ-25-DC which includes a fast, diffuse metallic coating and is capable of pulsed measurements in excess of 40,000 pps. Both probes are directly compatible with Spectrums delta-DPM USB based Digital Power Module which includes powerful LabView Applications Software.
"These new large area delta Joulemeter probes expand our line of USB based laser pulse energy detectors to better accommodate the wide variety of pulse lasers that exist today", said Don Dooley, president of Spectrum Detector.
Read full article: 'New Large Area, 25 mm diameter Pyroelectric Joulemeter Probes'
Posted by Anonymous on Wednesday, May 27, 2009 (999 Reads)
New Products : 24-Bit, 4-Channel, Simultaneous-Sampling, Cascadable, Sigma-Delta ADC
MAX11040 Cascadable Up to 32 Simultaneous Channels The MAX11040 is a 24-bit, 4-channel, simultaneous-sampling, sigma-delta analog-to-digital converter (ADC). The device allows simultaneous sampling of as many as 32 channels using a built-in cascade feature to synchronize as many as eight devices.
The serial interface of the MAX11040 allows reading data from all the cascaded devices using a single command. Four modulators simultaneously convert each fully differential analog input with a programmable data output rate ranging from 0.25ksps to 64ksps.
The device achieves 106dB SNR at 16ksps and 117dB SNR at 1ksps.
Read full article: '24-Bit, 4-Channel, Simultaneous-Sampling, Cascadable, Sigma-Delta ADC'
Posted by Anonymous on Monday, May 25, 2009 (1216 Reads)
Applications : Condition Assessment for wind power plants
ISMANING / HANOVER, GERMANY – - PRUFTECHNIK Condition Monitoring is offering the new service of Condition Assessment for wind power plants that are not equipped with a Condition Monitoring System. The result of this analysis will help the operating company as well as the manufacturer to identify damages in time. This is of specific interest, when the warranty period is running out. It does enable operating companies as well as manufacturers to file warranty claims if needed.
A condition assessment should also be part of every due diligence evaluation if a wind park is changing the owner.
Read full article: 'Condition Assessment for wind power plants'
Posted by Anonymous on Sunday, May 24, 2009 (1302 Reads)
Vendor : Large Displays from Global
Nottingham, UK -- Continuing the program of Product Development in their core area of Process Measurement Equipment, Global Measurement & Control Ltd are delighted to offer Large Digital Displays.* Ideal for internal or outdoor display of critical information
* A unique user-friendly 'no menu' approach, giving a clear set-up and calibration method
* Range of digit sizes make the displays very visible - even up to 200m away
* Wide variety of display functions
* Slim and easy to install
Read full article: 'Large Displays from Global'
Posted by Anonymous on Saturday, May 23, 2009 (1016 Reads)
New Products : Fully CISPR 16 Compliant Measurements on Frequencies Up to 6 GHz
Compact, Digital 30 MHz EMI/EMC Receiver from Teseq
EDISON NJ, USA, -- /PRNewswire/ -- Teseq Inc. now offers a low cost, high performance, 30 MHz digital EMI/EMC receiver with flexible measurement parameters on frequencies up to 6 GHz that meet all current industry testing standards, while enabling easy upgrades for future requirements. Teseq is the exclusive North American distributor for PMM, a brand of Narda Safety Test Solutions srl, which manufactures the compact, modular PMM 9010 receiver.
The new PMM 9010 uses analog-to-digital conversion and powerful digital signal processing to eliminate aging of critical parts that could degrade measurement accuracy and provide more stable performance than analog receivers.
The CISPR detectors, IF and RBW filters are all absolutely stable and feature lifetime, calibration-free operation.
Read full article: 'Fully CISPR 16 Compliant Measurements on Frequencies Up to 6 GHz'
Posted by Anonymous on Friday, May 22, 2009 (1486 Reads)
Devices : LC-MS Wins ACHEMA Innovation Award
Thermo Fisher Scientific’s Exactive LC-MS Wins Prestigious ACHEMA Award
SAN JOSE CA, USA– Thermo Fisher Scientific Inc. has announced that it has been presented with the ACHEMA 2009 Innovation Award for the category of Laboratory and Analytical Techniques. The Thermo Scientific Exactive is a high resolution benchtop LC-MS for simple and complex sample screening in a wide range of applications, including environmental, drug discovery, pharmaceutical and clinical/toxicology.
The PROCESS Innovation Award honors the most innovative technologies and equipment at ACHEMA, the world forum of the chemical engineering, environmental protection and biotechnology industries, which in 2009 had more than 4000 exhibitors.
The ground-breaking Thermo Scientific Exactive was selected from a field of eighteen entrants.
Read full article: 'LC-MS Wins ACHEMA Innovation Award'
Posted by scottpr on Thursday, May 21, 2009 (1292 Reads)
< 1 – 11 – 21 – 31 – 41 – 51 – 61 – 71 – 81 – 91 – 101 – 111 – 121 – 131 – 141 – 142 – 143 – 144 – 145 – 146 – 147 – 148 – 149 – 150 – 151 – 152 – 153 – 154 – 155 – 156 – 157 – 158 – 159 – 160 – 161 – 162 – 163 – 164 – 165 – 166 – 167 – 168 – 169 – 179 – 189 – 199 – 209 – 219 – 229 – 239 – 249 – 259 – 269 – 279 – 289 – 299 – 309 >
