Vendors, Devices & Services New to Our Directories
Measurement Device News
Vendor : Affordable Genetic Analysis System
Benchtop system can generate 27,000 to more than 200,000 genotypes per day
Amsterdam, Netherlands & South San Francisco CA, USA -- Fluidigm Europe has announced the new EP1 system for genetic analysis. It combines the efficiencies of integrated fluidic circuit (IFC)-based genotyping in a desktop-sized configuration, with a very affordable system price.
The new compact benchtop system, with Fluidigm Dynamic Arrays, provides superior data quality, a fast and easy workflow, and significant cost savings for SNP genotyping studies.
The EP1 system delivers the highest quality SNP genotyping results on the market with better than 99 percent call rates and 99.75 percent or greater accuracy. All of this is achieved with an easy-to-use, high-throughput workflow that can provide up to 9,216 data points per IFC chip with results in just four hours.
The EP1 system, which includes the IFC Controller, Stand Alone Thermal Cycler and End Point Reader, provides over 27,000 genotypes a day.
Read full article: 'Affordable Genetic Analysis System'
New Products : New retractable pH sensor for tough industrial applications
Endura TBX587 provides new option for difficult pH measurements
Warminster PA, USA -- ABB has announced the release of the Endura TBX587 Retractable pH sensor. Responding to customer requests, the Endura TBX587 targets 1-inch NPT process connections found in sample lines in refineries, chemical plants, and other industrial applications.
The Endura TBX587 incorporates many innovative design elements into one convenient pH measurement system. The temperature compensation element has been moved to the tip of the sensor to provide response times up to 6x faster then conventional gel-filled pH sensors.
An optional IP68 Vario Pin style cable connector simplifies sensor replacement without complicated wiring or terminal strips. The mechanical design of the Endura TBX587 includes a large “T” style handle to aid in insertion and retraction into pressurized process pipelines.
Read full article: 'New retractable pH sensor for tough industrial applications'
New Products : New Acu-Trac® Smart 485 Level Transducer
The Acu-Trac® Smart 485 Level Transducer is an economical level sensing solution for storage containers with depths up to 1.9 meters (76 inches) for gasoline and 2.5 meters (98 inches) for other media.
It combines level monitoring with RS-485 real time level messaging. The Smart 485 family is chemically compatible with a wide variety of liquids - gasoline, diesel fuel, oils, urea (Adblue), water, wastewater, ethanol, hydraulic fluid, and engine coolants.
Read full article: 'New Acu-Trac® Smart 485 Level Transducer'
New Products : Process Sensors Thermal View 640N
High resolution, real time, thermal imager for high temperature measurements
Franklin Lakes NJ, USA -- Designed for long-term use in harsh industrial environments such as the steel and cement industries, the Thermal View 640N thermal imager provides non-contact measurement of 2D temperature distributions with high dynamic range and spatial resolution. The High Performance Thermal View 640N is used for process monitoring and control for a variety of high temperature applications.
The newly developed 640N high temperature IR-Imager with a spectral range in the near infrared (NIR)provides for a wide dynamic range by utilizing a specialized detector and signal processing.
Read full article: 'Process Sensors Thermal View 640N'
Vendor : New Analytical Method Helps Control Hard-to-Measure Contamination
Entegris combines precision measurement with contamination control to extend the lifetime of advanced lithography optics
CHASKA (Minneapolis) MN, USA - Entegris, Inc. introduced a new solution for accurately measuring and controlling volatile organic compounds that cause contamination in advanced semiconductor lithography processes. If left uncontrolled, these low molecular weight, silicon-containing, organic compounds (such as TMS) have been shown to impact 248 nm and 193 nm exposure tools, and can lead to permanent damage of sensitive and costly optical components.
Entegris is is one of a few companies worldwide with analytical services capabilities to accurately sample and analyze these contaminants in the fab environment.
Manufacturers of scanner tools have already mandated the measurement of high molecular weight contaminants, but until now, there has been no means for fabs to reliably identify and quantify the presence of the low molecular weight variety.
Read full article: 'New Analytical Method Helps Control Hard-to-Measure Contamination'
Vendor : GAO Tek Inc. Introduces Precision LCR Meter
With effective measurement range for impedance, capacitance and inductance of respectively 0.01Ωto 10MΩ, 0.1pF to 100μF and 0.1nH to 100mH Toronto, Canada -- GAO Tek Inc. has added a precision LCR Meter, Model GAO2782, to its line of electronic test and measurement instruments.
This meter is specifically designed to measure impedance parameters including inductance (L), capacitance(C) and resistance(R) with high accuracy. It is ideally suited for components testing in factories, laboratories, and the like.
The LCR meter operates in the 75kHz to 30MHz frequency band with a resolution of 100Hz. Signal level range is 5mV to 2V.
The LCR meter's effective measurement range for impedance, capacitance and inductance are respectively 0.01Ωto 10MΩ, 0.1pF to 100μF and 0.1nH to 100mH.
Read full article: 'GAO Tek Inc. Introduces Precision LCR Meter'
Vendor : ABB launches new water analyzers at Automation & Power World 2009
Aztec range sets the new standard for colorimetric monitoring
Orlando, FL -- ABB Instrumentation introduced the first of three new products in the ABB Aztec 600 range of online analytical analyzers for potable water treatment at Automation & Power World 2009 in late March. Built on ABB's new analytical instrument platform, the ABB Aztec 600 Manganese colorimetric monitor offers enhanced accuracy with simple operation and maintenance for potable water treatment applications.
The Aztec 600 analyzers use an LED and detector to measure the passage of light through a sample. A single precisely controlled piston pump provides all the sample and reagent fluid handling for measurement, mixing and disposal.
Read full article: 'ABB launches new water analyzers at Automation & Power World 2009'
Vendor : QualiScope II Advanced Automatic Brinell Measurement System
Ft Lauderdale FL, USA -- Qualitest presents QualiScope II, the latest technology in handheld automatic Brinell measurement systems.
QualiScope II is designed to make your testing program faster and more accurate. It also improves quality control management - it automatically stores data and is network capable.
Although the Brinell test is widely known as one of the most accurate test methods for hardness testing of metals, error in the reading of the indentation size results in measurement errors of 0.1 mm between operators - the range is even greater between labs. This error can take up your entire tolerance specification.
The QualiScope II will virtually eliminate operator influence on test results. Repeatability and reproducibility will be greatly improved using the QualiScope II measurement system; test results will no longer change with every shift change.
Read full article: 'QualiScope II Advanced Automatic Brinell Measurement System'
Applications : Measuring ± 0.1°C Temperature Variations With Thermocouples
Ultra Precision Systems for the Large Synoptic Survey Telescope in Chile
{Image credit: LSST Corporation}Gainesville FL, USA -- GEC Instruments has been awarded a contract from LSST Corporation in Tucson, Arizona, to build four ultra high accuracy, high resolution temperature measurement instruments, each with 94 thermocouple input channels, accompanied by software for display, plotting, logging, and retrieval of temperature data.
This instrumentation will be used to measure small temperature variations over the range -5 °C to 25 °C on the 27 foot diameter primary/tertiary mirror for the Large Synoptic Survey Telescope (www.lsst.org), a ground-based facility that will be located atop Cerro Pachón in the Chilean Andes.
This project requires ultra high accuracy in temperature measurements with thermocouples, and unprecedented channel to channel uniformity of ± 0.02 °C among all 376 channels of the system.
Read full article: 'Measuring ± 0.1°C Temperature Variations With Thermocouples'
New Products : Ultra-fast framing camera offers unmatched ease of use
For automotive testing, biomedical research, combustion research and more
Tring, UK -- Available from Specialised Imaging Ltd. the SIM-D is a compact ultra fast framing camera system that uniquely combines ease of use, ease of maintenance, affordability and high performance. Sharing many common features with Specialised Imaging Ltd's performance benchmark setting SIM range of cameras, the SIM-D Ultra Fast Framing camera is perfectly suited for applications in fields as diverse as automotive testing, biomedical research, combustion research, failure dynamics, impact studies, nanotechnology and university research.
The intuitive design of the SIM-D allows even occasional users to achieve top quality results.
Read full article: 'Ultra-fast framing camera offers unmatched ease of use'
< 1 – 11 – 21 – 31 – 41 – 51 – 61 – 71 – 81 – 91 – 101 – 111 – 121 – 131 – 141 – 142 – 143 – 144 – 145 – 146 – 147 – 148 – 149 – 150 – 151 – 152 – 153 – 154 – 155 – 156 – 157 – 158 – 159 – 160 – 161 – 162 – 163 – 164 – 165 – 166 – 167 – 168 – 169 – 170 – 171 – 181 – 191 – 201 – 211 – 221 – 231 – 241 – 251 – 261 – 271 – 281 – 291 – 301 >
